SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2007GRAND CHEROKEE OVERLAND, 5.7 2, RWDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSCONNECTOR END VIEWSCONNECTOR PIN-OUTSFRONT CONTROL IPM MODULE CONNECTOR END VIEW
2007 Jeep Grand Cherokee Overland, 5.7 2, RWD

Front Control Ipm Module Connector End View

2007 Jeep Grand Cherokee Overland, 5.7 2, RWDSECTION Front Control Ipm Module Connector End View
MODULE-FRONT CONTROL IPM - 49 WAY

GCWH680220Courtesy of DAIMLERCHRYSLER CORP.
CAV CIRCUIT FUNCTION
1 - -
2 INTERNAL FUSED B(+)
3 INTERNAL FUSED B(+)
4 INTERNAL FUSED B(+)
5 INTERNAL FUSED B(+)
6 - -
7 INTERNAL BACKUP LAMP FEED
8 - -
9 - -
10 K360 20GY/BR (DIESEL) PTC NO. 1 RELAY CONTROL
11 W20 18BR/YL REAR WASHER PUMP MOTOR CONTROL
12 W10 18BR FRONT WASHER PUMP MOTOR CONTROL
13 INTERNAL FUSED IGNITION SWITCH OUTPUT (RUN-START)
14 K361 20BR/WT (DIESEL) PTC NO. 2 RELAY CONTROL
15 INTERNAL FUSED B(+)
16 - -
17 INTERNAL FUSED IGNITION SWITCH OUTPUT (RUN-START)
18 INTERNAL GROUND
19 INTERNAL GROUND
20 - -
21 INTERNAL (TRAILER TOW) RIGHT TRAILER TOW BRAKE LAMP RELAY CONTROL
22 INTERNAL (TRAILER TOW) LEFT TRAILER TOW BRAKE LAMP RELAY CONTROL
23 - -
24 INTERNAL GROUND
25 INTERNAL GROUND
26 INTERNAL FRONT FOG LAMP RELAY CONTROL
27 INTERNAL WIPER ON/OFF RELAY CONTROL
28 INTERNAL REAR FOG LAMP RELAY CONTROL
29 INTERNAL HIGH/LOW WIPER RELAY CONTROL
30 A15 16RD/TN FUSED ASD RELAY OUTPUT
31 W7 20BR/GY FRONT WIPER PARK SWITCH SENSE
32 INTERNAL GROUND
33 INTERNAL GROUND
34 L62 18WT/OR RIGHT REAR TURN SIGNAL CONTROL
35 C918 20BK/LB FCM SENSOR RETURN
36 - -
37 W12 20BR/OR REAR WIPER RELAY CONTROL
38 P305 20LG/LB ACCESSORY DELAY RELAY CONTROL
39 INTERNAL LOW SPEED RADIATOR FAN RELAY CONTROL
40 - -
41 INTERNAL GROUND
42 - -
43 INTERNAL LEFT REAR TURN SIGNAL CONTROL
44 - -
45 K173 20BR/VT (EXCEPT 3.7L/DIESEL) HYDRAULIC RADIATOR FAN SOLENOID CONTROL
46 INTERNAL (ADJUSTABLE PEDALS) ADJUSTABLE PEDALS RELAY CONTROL
47 INTERNAL HORN RELAY CONTROL
48 INTERNAL PARK LAMP RELAY CONTROL
49 INTERNAL (3.7L/DIESEL) RADIATOR FAN HIGH RELAY CONTROL
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.