SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2007GRAND CHEROKEE OVERLAND, 3.0 M, RWDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSCONNECTOR END VIEWSCONNECTOR PIN-OUTSPOWERTRAIN CONTROL MODULE CONNECTOR END VIEW (C3)
2007 Jeep Grand Cherokee Overland, 3.0 M, RWD

Powertrain Control Module Connector End View (C3)

2007 Jeep Grand Cherokee Overland, 3.0 M, RWDSECTION Powertrain Control Module Connector End View (C3)
MODULE-POWERTRAIN CONTROL C3 - BLACK/NATURAL 38 WAY

GCWH680248Courtesy of DAIMLERCHRYSLER CORP.
CAV CIRCUIT FUNCTION
1 - -
2 - -
3 K342 20BR/WT ASD RELAY CONTROL
4 - -
5 V35 20VT/OR (3.7L/4.7L) S/C VENT SOL CONTROL
5 K454 18BR/OR (5.7L) MDS SOL CONTROL NO. 7
6 K451 18BR/WT (5.7L) MDS SOL CONTROL NO. 1
7 V32 20VT/YL (3.7L/4.7L) S/C SUPPLY
8 K106 20VT/LB NVLD SOL CONTROL
9 K299 18BR/OR O2 1/2 HEATER CONTROL
10 K399 18BR/GY O2 2/2 HEATER CONTROL
11 C13 20LB/OR A/C CLUTCH RELAY CONTROL
12 V36 20VT/YL (3.7L/4.7L) S/C VACUUM SOL CONTROL
13 - -
14 B16 20LB/DG (5.7L/SRT8) BRAKE SWITCH NO. 2 SIGNAL
15 V937 20VT/BR S/C SWITCH RETURN
16 K167 20BR/YL (5.7L/SRT8) APPS NO. 1 SENSOR GROUND
17 K400 20BR/VT (5.7L/SRT8) APPS NO. 2 SENSOR GROUND
18 V72 20OR/VT (5.7L/SRT8) S/C SWITCH SENSE 2
19 F42 16DG/LG FUSED ASD RELAY OUTPUT
20 K52 20DB/YL (GAS EXCEPT SRT8) EVAP PURGE SOL SIGNAL
20 K52 20DB/WT (SRT8) EVAP PURGE SOL SIGNAL
21 - -
22 - -
23 B15 20DG/WT BRAKE SWITCH NO. 1 SIGNAL
24 - -
25 K23 20BR/WT (5.7L/SRT8) APPS NO. 1 SIGNAL
26 - -
27 T5 20DG/YL (4.7L/5.7L/SRT8) AUTOSTICK UP/DOWN (ERS) SENSE
28 F42 16DG/LG FUSED ASD RELAY OUTPUT
29 K70 20DB/BR EVAP PURGE SOL CONTROL
30 - -
31 - -
32 - -
33 G224 20VT/YL (5.7L/SRT8) ENGINE OIL TEMPERATURE SIGNAL
34 V71 20VT/OR S/C SWITCH SENSE 1
35 K107 20VT/WT NVLD SWITCH SIGNAL
36 K29 20WT/BR (5.7L/SRT8) APPS NO. 2 SIGNAL
37 K31 20BR FUEL PUMP RELAY CONTROL
38 T752 20DG/OR ENGINE STARTER MOTOR RELAY CONTROL
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.