Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2007GRAND CHEROKEE LIMITED, 5.7 2, RWDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSCONNECTOR END VIEWSCONNECTOR PIN-OUTSOCCUPANT CLASSIFICATION MODULE CONNECTOR END VIEW (C2)
2007 Jeep Grand Cherokee Limited, 5.7 2, RWD
Occupant Classification Module Connector End View (C2)
2007 Jeep Grand Cherokee Limited, 5.7 2, RWDSECTION Occupant Classification Module Connector End View (C2)
MODULE-OCCUPANT CLASSIFICATION C2 - 12 WAY
| CAV | CIRCUIT | FUNCTION |
| 1 | R726 20LG/YL | SEAT WEIGHT SENSOR 5 VOLT |
| 2 | R264 20VT/LB | PASSENGER SEAT POSITION SENSOR VOLTAGE |
| 3 | R717 20LG/DG | SEAT WEIGHT LEFT FRONT SENSOR SIGNAL |
| 4 | - | - |
| 5 | R718 20LB/DG | SEAT WEIGHT RIGHT FRONT SENSOR SIGNAL |
| 6 | - | - |
| 7 | R706 20LB/OR | SEAT WEIGHT RIGHT REAR SENSOR SIGNAL |
| 8 | - | - |
| 9 | R705 20LG/OR | SEAT WEIGHT LEFT REAR SENSOR SIGNAL |
| 10 | - | - |
| 11 | R262 20WT/LB | PASSENGER SEAT POSITION SENSOR DATA |
| 12 | R728 20LB/YL | SEAT WEIGHT SENSOR GROUND |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.