Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2002LIBERTY LIMITED EDITION 2WD V6-3.7L VIN KREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSTRANSMISSION AND DRIVETRAINMANUAL TRANSMISSION/TRANSAXLESYSTEM SPECIFICATIONS
2002 Jeep Liberty Limited Edition 2WD V6-3.7L VIN K
System Specifications
2002 Jeep Liberty Limited Edition 2WD V6-3.7L VIN KSECTION System Specifications
NV3550 Manual Transmission:
INSTALLATION / NV3550 Manual Transmission
Mopar Transmission Lubricant.
Clutch Housing To Trans Bolts 46 Nm (34 ft. lbs.)
Clutch Housing To Engine Bolts 68 Nm (50 ft. lbs.)
Shift Tower Bolts 7 - 10 Nm (5 - 7 ft. lbs.)
Trans Mount Bolts 47 Nm (35 ft. lbs.)
Crossmember Frame Bolts 61 - 75 Nm (44 - 55 ft. lbs.)
Crossmember To Insulator Nuts 54 - 61 Nm (40 - 45 ft. lbs.)
ASSEMBLY / NV3550 Manual Transmission
Rear housing (2WD) retainer bolts 30 - 35 Nm (22 - 26 ft. lbs.)
housing attaching bolts 34 Nm (25 ft. lbs.)
Drain/Fill Plug 9 - 27 Nm (14 - 20 ft. lbs.)
Front Bearing Retainer Bolts 7 - 10 Nm (5 - 7 ft. lbs.)
Rear Bearing Retainer Bolts 30 - 35 Nm (22 - 26 ft. lbs.)
Idler Shaft Bolts 19 - 25 Nm (14 - 18 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.