Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2002LIBERTY LIMITED EDITION 2WD V6-3.7L VIN KREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSEXHAUST MANIFOLD
2002 Jeep Liberty Limited Edition 2WD V6-3.7L VIN K
Exhaust Manifold
2002 Jeep Liberty Limited Edition 2WD V6-3.7L VIN KSECTION Exhaust Manifold
Manifold to Head Bolts 25 Nm (18 ft. lbs.)
Exhaust Pipe to Exhaust Manifold Nuts/Bolts 34 Nm (25 ft. lbs.)
Exhaust Manifold Heat Shield Nuts 8 Nm (72 in. lbs.), loosen 45 °
Exhaust Pipe to Exhaust Manifold Nuts/Bolts 34 Nm (25 ft. lbs.)
Exhaust Manifold Heat Shield Nuts 8 Nm (72 in. lbs.), loosen 45 °
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.