Piston Specifications

2002 Jeep Liberty Limited Edition 2WD V6-3.7L VIN KSECTION Piston Specifications
PISTON

Material Aluminum Alloy
Diameter 92.975mm (3.6605 in.)
Weight 367.5 Grams (12.96 oz)
Clearance in Block 0.014 ± 0.0003 in.
Ring Groove Diameter
No. 1 83.73 - 83.97 mm (3.296 - 3.269 in.)
No. 2 82.833 - 83.033 mm (3.2 61 - 3.310 in.)
No. 3 83.88 - 84.08 mm (3.302 - 3.310 in.)

PISTON PINS

Type Floating
Clearance in Piston 0.010 - 0.019mm (0.0004 - 0.0008 in.)
Diameter 24.013 - 24.016mm (0.9454 - 0.9456 in.)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.