Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2002LIBERTY LIMITED EDITION 2WD V6-3.7L VIN KREPAIR AND DIAGNOSISA L L DIAGNOSTIC TROUBLE CODES ( DTC )TESTING AND INSPECTIONMANUFACTURER CODE CHARTSRESTRAINT SYSTEMMODULE NOT CONFIGURED FOR SAB
2002 Jeep Liberty Limited Edition 2WD V6-3.7L VIN K
Module Not Configured For SAB
2002 Jeep Liberty Limited Edition 2WD V6-3.7L VIN KSECTION Module Not Configured For SAB
Tests 1 - 2:
Tests 3 - 4:
SYMPTOM
MODULE NOT CONFIGURED FOR SAB
WHEN MONITORED
With ignition ON, the ACM monitors the PCI Bus for messages from the Left and Right Side Impact Airbag Control Modules.
SET CONDITION
The code will set, if the ACM detects a Side Impact Airbag Control Module active on the PCI Bus and the ACM is not configured for side airbags.
POSSIBLE CAUSES
- Module not configured
- ACM, not configured for side airbags
- Stored code or intermittent condition
- Active code present
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.