Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP1997CHEROKEE SE, 4D UTILITY, 4.0 S, 4WD, STANDARDREPAIR AND DIAGNOSISRESTRAINTSAIR BAG, SRSAIR BAG RESTRAINT SYSTEMREMOVAL & INSTALLATIONAIR BAG CONTROL MODULE (ACM)INSTALLATION
1997 Jeep Cherokee SE, 4D Utility, 4.0 S, 4WD, Standard
Air Bag Control Module (ACM): Installation
1997 Jeep Cherokee SE, 4D Utility, 4.0 S, 4WD, StandardSECTION Installation
- Ensure ACM housing arrow is pointed forward and attach ACM to floor plan mounting bracket with three nuts. Tighten to specification, see TORQUE SPECIFICATIONS .
- Plug in wire harness connector to ACM and ensure connector latches are fully engaged. Position ACM protective cover over ACM and ensure wire harness retainer is correctly installed in slotted hole of ACM protective cover. Secure with screws and tighten to specification.
- To complete installation, reverse remaining removal procedures. DO NOT connect negative battery cable at this time. Check for proper system function. See TESTING - SYSTEM OPERATION CHECK .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.