Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP1994CHEROKEE SE, 2D UTILITY, 4.0 S, 4WD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 31 (3.0L V6 - VIN [3])ENGINE SPECIFICATIONSCYLINDER HEAD SPECIFICATIONS
1994 Jeep Cherokee SE, 2D Utility, 4.0 S, 4WD, Standard
Cylinder Head Specifications
1994 Jeep Cherokee SE, 2D Utility, 4.0 S, 4WD, StandardSECTION Cylinder Head Specifications
WARNING: This page is about a different car, the 1994 Plymouth Sundance, 1994 Plymouth Acclaim, 1994 Dodge Spirit, 1994 Dodge Shadow, and 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD SPECIFICATIONS
| Application | Specification | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Maximum Warpage | (1) .002" (.05 mm) | ||||||||
| Valve Seats | |||||||||
| Seat Angle | 44° | ||||||||
| Seat Width | .035-.051" (.90-1.30 mm) | ||||||||
| Valve Guides | |||||||||
| Intake Valve | |||||||||
| Valve Guide Length | 1.732 (44.00) | ||||||||
| Valve Guide I.D. | .3149-.3157" (8.000-8.018 mm) | ||||||||
| Valve Stem-To-Guide Clearance | (2) .001-.002" (.03-.05 mm) | ||||||||
| Exhaust Valve | |||||||||
| Valve Guide Length | 1.889 (48.00) | ||||||||
| Valve Guide I.D. | .3149-.3157" (8.000-8.018 mm) | ||||||||
| Valve Stem-To-Guide Clearance | (3) .002-.004" (.05-.10 mm) | ||||||||
|
|||||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.