SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP1994CHEROKEE SE, 2D UTILITY, 4.0 S, 4WD, STANDARDREPAIR AND DIAGNOSISENGINE MECHANICALMECHANICAL4.0L 6-CYL - VIN [S]TORQUE SPECIFICATIONS
1994 Jeep Cherokee SE, 2D Utility, 4.0 S, 4WD, Standard

Torque Specifications

1994 Jeep Cherokee SE, 2D Utility, 4.0 S, 4WD, StandardSECTION Torque Specifications
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Camshaft Sprocket Preload Bolt 80 (108)
Connecting Rod Cap Nut 33 (45)
Cylinder Head Bolts (1)
Stage 1 22 (30)
Stage 2 45 (61)
Stage 3 (2) 110 (149)
Exhaust Manifold Bolts (2)
Bolts No. 1-5 & No. 8-11 24 (33)
Bolts No. 6 & 7 23 (31)
Fan Bolt 18 (24)
Flexplate-To-Converter Bolts
9.5" 3-Lug Converter (0.46" Bolt) 40 (54)
9.5" 4-Lug Converter (0.52" Bolt) 55 (75)
10" 4-Lug Converter (0.52" Bolt) 55 (75)
10.75" 4-Lug Converter (0.44" Bolt) 23 (31)
Flexplate-To-Crankshaft Bolts 55 (75)
Flywheel-To-Crankshaft Bolts 105 (142)
Intake Manifold Bolts (2)
Bolts No. 1-5 & No. 8-11 24 (33)
Bolts No. 6 & 7 23 (31)
Main Bearing Cap Bolts
Stage 1 40 (54)
Stage 2 70 (95)
Stage 3 80 (108)
Oil Pump Retaining Bolts
Long 17 (23)
Short 10 (14)
Pulley-To-Vibration Damper Bolts 20 (27)
Rocker Arm Bolts 21 (29)
Starter Bolts 33 (45)
Vibration Damper Bolt (3) 80 (108)
Water Pump Bolts 22 (30)
INCH Lbs. (N.m) 
Front Cover Bolts 62 (7)
Oil Pan Bolts
1/4" X 20 120 (14)
5/16" X 18 156 (18)
Oil Pump Cover Bolts 70 (8)
Valve Cover Bolts 80 (9)
(1) All bolts except No. 11. Tighten bolt No. 11 to 100 ft. lbs. (136 N.m) See Figure.
(2) Tighten in sequence. See Figure.
(3) With bolt cleaned and threads lubricated with oil.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.