Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP1991CHEROKEE 2WD L4-150 2.5L VIN P MFIREPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINDIFFERENTIAL ASSEMBLYSPECIFICATIONSTORQUE SPECIFICATIONSMODEL 35
1991 Jeep Cherokee 2WD L4-150 2.5L VIN P MFI
Model 35
1991 Jeep Cherokee 2WD L4-150 2.5L VIN P MFISECTION Model 35
MODEL 35 AXLE
BRAKE SUPPORT PLATE NUT 32 ft.lbs. (43 Nm)
DIFEERENTAL HOUSING COVER BOLT 35 ft.lbs. (47 Nm)
COVER FILL PLUG 25 ft.lbs. (34 Nm)
WHEEL LUG NUT 75 ft.lbs. (102 Nm)
U-JOINT CLAMP SCREW 170 in.lbs. (19 Nm)
RING GEAR BOLT 55 ft.lbs. (75 Nm)
DIFFERENTIAL BEARING CAP BOLT 57 ft.lbs. (77 Nm)
SPRING EYE BOLT 105 ft.lbs. (142 Nm)
SPRING SHACKLE BOLT 95 ft.lbs. (129 Nm)
SHOCK ABSORBER NUT 44 ft.lbs. (60 Nm)
SPRING U-BOLT NUT 90 ft.lbs. (122 Nm)
TRACK BAR BOLTS/NUT5 125 ft.lbs. (168 Nm)
AXLE JOUNCE BUMPER 20 ft.lbs. (27 Nm)
WHEEL CYUNDER BRAKE LINE FITTING 132 in.lbs. (15 Nm)
BRAKE HOSE JUNCTION BLOCK SCREW 70 in.lbs. (8 Nm)
BRAKE SUPPORT PLATE NUT 32 ft.lbs. (43 Nm)
DIFEERENTAL HOUSING COVER BOLT 35 ft.lbs. (47 Nm)
COVER FILL PLUG 25 ft.lbs. (34 Nm)
WHEEL LUG NUT 75 ft.lbs. (102 Nm)
U-JOINT CLAMP SCREW 170 in.lbs. (19 Nm)
RING GEAR BOLT 55 ft.lbs. (75 Nm)
DIFFERENTIAL BEARING CAP BOLT 57 ft.lbs. (77 Nm)
SPRING EYE BOLT 105 ft.lbs. (142 Nm)
SPRING SHACKLE BOLT 95 ft.lbs. (129 Nm)
SHOCK ABSORBER NUT 44 ft.lbs. (60 Nm)
SPRING U-BOLT NUT 90 ft.lbs. (122 Nm)
TRACK BAR BOLTS/NUT5 125 ft.lbs. (168 Nm)
AXLE JOUNCE BUMPER 20 ft.lbs. (27 Nm)
WHEEL CYUNDER BRAKE LINE FITTING 132 in.lbs. (15 Nm)
BRAKE HOSE JUNCTION BLOCK SCREW 70 in.lbs. (8 Nm)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.