Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJAGUAR2018XE BASE, 2.0L ENG VIN N, AWDREPAIR AND DIAGNOSISGENERAL INFORMATIONDTC INDEXDIAGNOSTIC TROUBLE CODE INDEX DTC: BODY CONTROL MODULE (BCM)DIAGNOSTIC TROUBLE CODE INDEX DTC: BODY CONTROL MODULE (BCM)DESCRIPTION AND OPERATIONBODY CONTROL MODULE (BCM)U3000-49 CONTROL MODULE - INTERNAL ELECTRONIC FAILUREACTION
2018 Jaguar XE Base, 2.0L Eng VIN N, AWD
U3000-49 Control Module - Internal electronic failure: Action
2018 Jaguar XE Base, 2.0L Eng VIN N, AWDSECTION Action
NOTE:
This DTC is set when one or more short circuits have been detected. The relevant output circuits have been disabled permanently.
- Using the Jaguar Land Rover approved diagnostic equipment, check for other short circuit to ground/power related DTCs and perform the relevant corrective actions. Install a new body control module / gateway module assembly
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.