Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJAGUAR2016XJR BASEREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXDIAGNOSTIC TROUBLE CODE (DTC) INDEX DTC: INFOTAINMENT MASTER CONTROLLER (IMC) -- XJ/X351DIAGNOSTIC TROUBLE CODE (DTC) INDEX DTC: INFOTAINMENT MASTER CONTROLLER (IMC)DESCRIPTION AND OPERATIONINFOTAINMENT MASTER CONTROLLER/INFOTAINMENT SLAVE CONTROLLER (IMC/ISC)DTC U3000-04: CONTROL MODULE - SYSTEM INTERNAL FAILURESACTION
2016 Jaguar XJR Base
DTC U3000-04: Control Module - System internal failures: Action
2016 Jaguar XJR BaseSECTION Action
NOTE:
If DTCs B14B4-15, B14B5-15 and B1492-11 are logged in the infotainment master controller alongside this DTC, this does not indicate a fault with the associated DTCs
- Using the Jaguar Land Rover approved diagnostic equipment, update the infotainment master controller to the latest level software and retest
- If the fault persists, do not replace the infotainment master controller. Contact the Jaguar Land Rover service desk for further assistance
- Using the Jaguar Land Rover approved diagnostic equipment, update the infotainment slave controller to the latest level software and retest
- If the fault persists, do not replace the infotainment slave controller. Contact the Jaguar Land Rover service desk for further assistance
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.