Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engage Speed Control
Speed control is engaged by pressing the SET "+" switch. On receipt of the switch input, the ECM adopts the current vehicle speed as the speed control set speed. When speed control is engaged the IC illuminates the speed control warning indicator and a green marker will appear on the outer circumference of the speedometer in the IC, adjacent to the set speed. If the set speed is changed the marker will move accordingly. If the speed control is cancelled the marker changes to a gray color until the resume switch is pressed to reengage speed control, when it changes back to a green color.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.