2014 Jaguar XFRFACTORY OEM SERVICE PROCEDURE

Air Distribution Control

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2012 Jaguar XFR, 2012 Jaguar XF, 2011 Jaguar XFR, 2011 Jaguar XF, and 2010 Jaguar XFR. However, it is still accessible from the selected car via links, so may be relevant.

Two air distribution doors are used to direct air into the passenger compartment. The doors are operated by stepper motors, which are controlled by the automatic temperature control (ATC) module using local interconnect network (LIN) bus messages.

When the air conditioning (A/C) system is in automatic mode, the automatic temperature control (ATC) module automatically controls air distribution into the passenger compartment in line with its 'comfort' algorithm. Automatic control is overridden if any of the TSD air distribution soft buttons are selected. Air distribution in the passenger compartment will remain as selected until the 'Auto' switch is pressed or a different manual selection is made.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.