Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJAGUAR2012XF PORTFOLIOREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 84 (DIAGNOSTIC TROUBLE CODE: DRIVER/PASSENGER SEAT MODULE (DSM/PSM) -- XF/X250)
2012 Jaguar XF Portfolio
Section 84 (Diagnostic Trouble Code: Driver/Passenger Seat Module (DSM/PSM) -- XF/X250)
2012 Jaguar XF PortfolioSECTION Section 84 (Diagnostic Trouble Code: Driver/Passenger Seat Module (DSM/PSM) -- XF/X250)
WARNING: This page is about a different car, the 2015 Jaguar XF, 2014 Jaguar XF, and 2013 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
- Diagnostic Trouble Code (DTC) Index DTC: Driver/Passenger Seat Module (DSM/PSM)
- Description And Operation
- Driver/Passenger Seat Module (DSM/PSM)
- DTC B105F-11: Seat Cushion Extension Motor Output - Circuit short to ground
- DTC B105F-15: Seat Cushion Extension Motor Output - Circuit short to battery or open
- DTC B1060-11: Seat Headrest Motor Output - Circuit short to ground
- DTC B1060-15: Seat Headrest Motor Output - Circuit short to battery or open
- DTC B1063-31: Seat Cushion Extension Motor Sensor - Circuit short to battery or open
- DTC B1064-31: Seat Headrest Motor Sensor - No signal
- DTC B1065-24: Cushion Extend Switch - Signal stuck high
- DTC B1066-24: Cushion Retract Switch - Signal stuck high
- DTC B106D-24: Headrest Up Switch - Signal stuck high
- DTC B106E-24: Headrest Down Switch - Signal stuck high
- DTC B1087-83: LIN Bus "A" -Value of signal protection calculation incorrect
- DTC B1087-86: LIN Bus "A" - Signal invalid
- DTC B1087-87: LIN Bus "A" - Missing message
- DTC B13F6-11: Passenger Seat Away Switch - Circuit short to ground
- DTC B1B86-11: Seat Height Motor Relay - Circuit short to ground
- DTC B1B86-15: Seat Height Motor Relay - Circuit short to battery or open
- DTC B1B87-31: Seat Height Motor Speed/Position Sensor - No signal
- DTC B1B88-11: Seat Slide Motor Relay - Circuit short to ground
- DTC B1B88-15: Seat Slide Motor Relay - Circuit short to battery or open
- DTC B1B89-31: Seat Slide Motor Speed/Position Sensor - No signal
- DTC B1B90-11: Seat Tilt Motor Relay - Circuit short to ground
- DTC B1B90-15: Seat Tilt Motor Relay - Circuit short to battery or open
- DTC B1B91-31: Seat Tilt Motor Speed/Position Sensor - No signal
- DTC B1B92-11: Seat Recline Motor Relay - Circuit short to ground
- DTC B1B92-15: Seat Recline Motor Relay - Circuit short to battery or open
- DTC B1B93-31: Seat Recline Motor Speed/Position Sensor - No signal
- DTC B1B94-24: Seat Height Up Switch - Signal stuck high
- DTC B1B95-24: Seat Height Down Switch - Signal stuck high
- DTC B1B96-24: Seat Slide Forward Switch - Signal stuck high
- DTC B1B97-24: Seat Slide Backward Switch - Signal stuck high
- DTC B1B98-24: Seat Tilt Up Switch - Signal stuck high
- DTC B1B99-24: Seat Tilt Down Switch - Signal stuck high
- DTC B1C00-24: Seat Recline Up Switch - Signal stuck high
- DTC B1C01-24: Seat Recline Down Switch - Signal stuck high
- DTC B1C02-24: Memory Store Switch - Signal stuck high
- DTC B1C03-24: Memory #1 Switch - Signal stuck high
- DTC B1C04-24: Memory #2 Switch - Signal stuck high
- DTC B1C05-24: Memory #3 Switch - Signal stuck high
- DTC U0010-88: Medium speed CAN Communication Bus - Bus off
- DTC U0140-00: Lost Communication With Body - No sub type information
- DTC U0151-00: Lost communication with Restraints Control Module - No sub type information
- DTC U0199-00: Lost Communication With "Door Control Module A" - No sub type information
- DTC U0300-00: Internal Control Module Software Incompatibility - No sub type information
- DTC U1A14-49: CAN Initialization Failure - Internal electronic failure
- DTC U1A4C-00: Build/End of Line mode Active - No sub type information
- DTC U2100-00: Initial Configuration Not Complete - No sub type information
- DTC U2101-00: Control Module Configuration Incompatible - No sub type information
- DTC U3000-49: Control Module - Internal electronic failure
- DTC U3001-46: Control Module Improper Shutdown - Calibration/parameter memory failure
- DTC U3002-81: Vehicle Identification Number - Invalid serial data received
- DTC U3003-16: Battery Voltage - Circuit voltage below threshold
- DTC U3003-17: Battery Voltage - Circuit voltage above threshold
- Description And Operation
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.