Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJAGUAR2011XJ SUPERCHARGEDREPAIR AND DIAGNOSISRESTRAINTSRESTRAINTS CONTROL SYSTEMSDIAGNOSTIC TROUBLE CODE INDEX DTC: RESTRAINTS CONTROL MODULE (RCM) -- XJ/X351DIAGNOSTIC TROUBLE CODE (DTC) INDEX DTC: RESTRAINTS CONTROL MODULE (RCM)DESCRIPTION AND OPERATIONRESTRAINTS CONTROL MODULE (RCM)DTC B1003-11: LEFT HOOD DEPLOYMENT CONTROL - CIRCUIT SHORT TO GROUNDACTION
2011 Jaguar XJ Supercharged
DTC B1003-11: Left Hood Deployment Control - Circuit short to ground: Action
2011 Jaguar XJ SuperchargedSECTION Action
- Refer to the applicable System Wiring Diagram(s) and check the left hood deployment control circuit for short circuit to ground. Install a new wiring harness as necessary. If no wiring harness fault exists, using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest. If the fault persists, install a new left hood deployment control
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.