Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJAGUAR2011XJ SUPERCHARGEDREPAIR AND DIAGNOSISQUICK LOOKUPSDTC INDEXDIAGNOSTIC TROUBLE CODE (DTC) INDEX DTC: CAMERA CONTROL MODULE (CCM) -- XJ/X351DIAGNOSTIC TROUBLE CODE (DTC) INDEX DTC: CAMERA CONTROL MODULE (CCM)DESCRIPTION AND OPERATIONCAMERA CONTROL MODULE (CCM)B12C1-31 RIGHT MIRROR CAMERA - NO SIGNALACTION
2011 Jaguar XJ Supercharged
B12C1-31 Right Mirror Camera - No signal: Action
2011 Jaguar XJ SuperchargedSECTION Action
- Refer to the electrical circuit diagrams and check the right mirror proximity camera low voltage differential signalling circuits for short circuit to ground, short circuit to power, open circuit, high resistance
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest. If the fault persists, install a new right mirror proximity camera
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.