Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJAGUAR2006XK (X100) V8-4.2L SCREPAIR AND DIAGNOSISBODY AND FRAMEDOORS, HOOD AND TRUNKFUEL DOORSERVICE AND REPAIR
2006 Jaguar XK (X100) V8-4.2L SC
Fuel Door: Service and Repair
2006 Jaguar XK (X100) V8-4.2L SCSECTION Service and Repair
Fuel Filler Door
Removal
1. Remove battery cover.
2. Remove trunk floor carpet.
3. Remove trunk front liner.
4. Remove trunk rear finisher.
5. Remove cover from LH rear lamp assembly.
6. If fitted pass fuel filler flap emergency release cord through slot and remove LH liner from trunk.
7. Supporting fuel filler flap, slacken and remove securing nuts and remove filler flap from vehicle.
Installation
1. Position fuel filler flap on vehicle and fit and tighten securing nuts.
2. Position LH side liner in trunk and if fitted pass emergency release cord through slot.
3. Fully seat LH liner.
4. Fit and fully seat cover on LH rear lamp.
5. Fit trunk rear finisher.
6. Fit trunk front liner.
7. Fit trunk floor carpet.
8. Fit battery cover.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.