Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Symptom chart
2005 Jaguar XJ8 BaseSECTION Symptom chart
| Symptom | Action |
|---|---|
| No display on either rear screen | To test the screens and circuits, GO to PINPOINT TEST G240121p1. . For screen power and ground circuit tests, GO to PINPOINT TEST G240121p11 and GO to PINPOINT TEST G240121p12 . |
| No display on right-hand rear screen | To test the screen and circuit, GO to PINPOINT TEST G240121p2 . For screen power and ground circuit tests, GO to PINPOINT TEST G240121p11 and GO to PINPOINT TEST G240121p12 . |
| No display on left-hand rear screen | To test the screen and circuit, GO to PINPOINT TEST G240121p3 . For screen power and ground circuit tests, GO to PINPOINT TEST G240121p11 and GO to PINPOINT TEST G240121p12 . |
| PAL/NTSC malfunction | To test the screens and circuits, GO to PINPOINT TEST G240121p1 , GO to PINPOINT TEST G240121p2 and GO to PINPOINT TEST G240121p3 . |
| No sound from the auxiliary input | For AUX1 tests, GO to PINPOINT TEST G240121p8 . For AUX2 tests, GO to PINPOINT TEST G240121p10 . |
| No display on AUX1 | For AUX1 tests, GO to PINPOINT TEST G240121p1 , GO to PINPOINT TEST G240121p2 and GO to PINPOINT TEST G240121p3 . |
| No display on AUX2 | For AUX2 tests, GO to PINPOINT TEST G240121p9 and GO to PINPOINT TEST G240121p10 . |
| No display in ACC position | For power and ground tests, GO to PINPOINT TEST G240121p5 . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.