Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Steering Column Lock Module - Removal and Installation: Installation
2003 Jaguar XK8 2D CoupeSECTION Installation
- Install the solenoid to the steering lock housing.
- Install the steering column switchgear mounting bracket; refer to this information.
- Install the cassette and cancellation module; refer to STEERING COLUMN .
- Install the steering wheel; refer to STEERING COLUMN .
- Install the air bag module; refer to SAFETY BELT SYSTEM or SUPPLEMENTAL RESTRAINT SYSTEM .
- Reconnect the battery ground cable.
- Install the battery cover.
- Install the underscuttle; refer to INTERIOR TRIM AND ORNAMENTATION .
- Install the steering column upper cowl; refer to INTERIOR TRIM AND ORNAMENTATION .
- Install the steering column lower cowl; refer to INTERIOR TRIM AND ORNAMENTATION .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.