Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2002 Jaguar XKR 100, 2D Coupe
Quick Lookups: Fluids
2002 Jaguar XKR 100, 2D CoupeSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 6.70 OZS. | 0.19 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.45 LBS. | 0.65 KG | R-134a | S | |||
| Automatic Transmission Fluid | 10.03 QTS. | 9.49 L | SHELL Automatic Transmission Fluid 3403 - M115 | S | |||
| Brake Fluid | N/A | N/A | JAGUAR ITT Super DOT 4 Brake Fluid | Fill to "max" line on the reservoir. | S | ||
| Differential Gear Oil | 1.90 QTS. | 1.79 L | SHELL SPIRAX Super TS 90 | S | |||
| Engine Coolant | 12.20 QTS. | 11.54 L | 50/50 mixture of water, JAGUAR Antifreeze/Coolant and Corrosion Inhibitor | Specification: WSS M97B44-D. Includes: reservoir and climate control. | S | ||
| Engine Oil | w/o Oil Cooler | 6.90 QTS. | 6.52 L | API - SAE 5W-30 | API - SJ/EC and ILSAC GF-2. | S | |
| Engine Oil | w/Oil Cooler | 7.70 QTS. | 7.28 L | API - SAE 5W-30 | API - SJ/EC and ILSAC GF-2. | S | |
| Fuel Tank | 19.80 GALS. | 74.95 L | S | ||||
| Power Steering Fluid | 1.05 QTS. | 0.99 L | Automatic Transmission Fluid DEXRON III | S | |||
| Windshield Washer Fluid | 7.40 QTS. | 7 L | Windscreen Washer Fluid and clean water | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.