Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJAGUAR2002XKR 100, 2D COUPEREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLANTI-LOCK CONTROLREMOVAL AND INSTALLATIONANTI-LOCK BRAKE SYSTEM (ABS) MODULEINSTALLATION
2002 Jaguar XKR 100, 2D Coupe
Anti-Lock Brake System (Abs) Module: Installation
2002 Jaguar XKR 100, 2D CoupeSECTION Installation
- Install ABS/TCCM, take care not to damage brake tubes.
- Install and tighten bolts.
- Install brake tubes.
- Remove plugs from ports and brake tubes.
- Install brake tubes and tighten union nuts. Refer to BRAKE TUBE, HOSES AND BRACKET TORQUE SPECIFICATIONS table for torque setting.
- Connect upper electrical connector.
- Push plunger down to secure connector.
- Install elbow to washer bottle filler neck.
- Install 'O'-ring seal.
- Install elbow.
- Remove special tool from brake pedal.
- Reconnect battery ground cable. Refer to BATTERY RECONNECTION PROCEDURE .
- Bleed brake system. Refer to BLEEDING BRAKE SYSTEM .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.