SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJAGUAR2002XK8 2D COUPEREPAIR AND DIAGNOSIS (SINGLE PAGE)GENERAL INFORMATIONCOMPUTER RELEARN PROCEDURES - IMPORTTOYOTAADDITIONAL SUB-KEY REGISTRATION (EXCEPT PRIUS)USING BRAKE & ACCELERATOR PEDAL
2002 Jaguar XK8 2D Coupe

Using Brake & Accelerator Pedal

2002 Jaguar XK8 2D CoupeSECTION Using Brake & Accelerator Pedal
  1. Insert registered master key in ignition lock cylinder. Within 15 seconds of inserting master key into ignition lock cylinder, depress and release accelerator pedal 4 times.
  2. Within 20 seconds of depressing and releasing accelerator pedal 4 times, depress and release brake pedal 5 times and remove master key from ignition lock cylinder.
  3. Within 10 seconds of removing master key from ignition lock cylinder, insert sub-key to be registered in ignition lock cylinder.
  4. Within 10 seconds of inserting sub-key in ignition lock cylinder, depress and release accelerator pedal one time. Ensure SECURITY indicator light flashes. SECURITY indicator light is displayed as a vehicle icon near the center of the tachometer.
  5. After one minute, additional sub-key should be registered and SECURITY indicator light should then turn off. If registering additional sub-keys, repeat process starting with step  3 within 10 seconds.
  6. The registration mode is complete after removing sub-key from ignition lock cylinder and depressing and releasing brake pedal at least once within 10 seconds after SECURITY indicator light has turned off, or at least 10 seconds has passed.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.