Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2002 Jaguar XJ8 Vanden Plas
Quick Lookups: Fluids
2002 Jaguar XJ8 Vanden PlasSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 6.50 OZS. | 0.19 L | PAG 150 | S | |||
| Air Cond Compressor Oil | 6.70 OZS. | 0.19 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.40 LBS. | 0.63 KG | R-134a | S | |||
| Air Cond Refrigerant | 1.50 LBS. | 0.68 KG | R-134a | S | |||
| Automatic Transmission Fluid | 10.60 QTS. | 10.03 L | ESSO LT 71141 | S | |||
| Brake Fluid | N/A | N/A | JAGUAR ITT Super DOT 4 Brake Fluid | Fill to "max" line on the reservoir. | S | ||
| Differential Gear Oil | 2.00 QTS. | 1.89 L | SHELL SPIRAX, Thermally Stable Super TS 90 | S | |||
| Engine Coolant | 10.60 QTS. | 10.03 L | 50/50 mixture of water, JAGUAR Antifreeze/Coolant and Corrosion Inhibitor | Specification: WSS M97B44-D. | S | ||
| Engine Oil | w/Filter | 6.20 QTS. | 5.86 L | API - SAE 5W-30 | API - SJ/EC and ILSAC GF-2. | S | |
| Fuel Tank | 21.40 GALS. | 81 L | S | ||||
| Power Steering Fluid | 1.00 QTS. | 0.94 L | Power Steering Fluid DEXRON III | S | |||
| Windshield Washer Fluid | 6.60 QTS. | 6.24 L | Windscreen Washer Fluid and clean water | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.