Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJAGUAR2002XJ8 VANDEN PLASREPAIR AND DIAGNOSISGENERAL INFORMATIONCOMPUTER RELEARN PROCEDURES - IMPORTLEXUSADDITIONAL MASTER KEYUSING IGNITION SWITCH
2002 Jaguar XJ8 Vanden Plas
Using Ignition Switch
2002 Jaguar XJ8 Vanden PlasSECTION Using Ignition Switch
NOTE:
Ensure driver's door is closed and key is not inserted in ignition switch.
- Insert registered master key in ignition.
- Perform this step within 35 seconds. Turn ignition switch on/off 5 times. Open/close driver's door 6 times. Remove master key from ignition.
- Perform this step within 10 seconds. Insert new key to be registered in ignition.
- After one minute, additional master key is registered. Security indicator should turn off. If programming additional keys, repeat process starting with step 2. If additional keys do not need programming, remove master key from ignition.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.