Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJAGUAR2000XJR (X308) V8-4.0L SC (AJ27)REPAIR AND DIAGNOSISMAINTENANCESERVICE INTERVALSNORMAL SERVICE70000 MI OR 112000 KM
2000 Jaguar XJR (X308) V8-4.0L SC (AJ27)
70000 MI or 112000 KM
2000 Jaguar XJR (X308) V8-4.0L SC (AJ27)SECTION 70000 MI or 112000 KM
Diagnose/Test
Vehicle
Conduct road test; verify parking brake operation
Inspect
Windshield Washer Reservoir
Check / top up windshield washer fluid level.
Tires
Check tire pressure, tread depth and general condition; check for signs of uneven wear; check that tires are correct size and type (check should include spare tire).
Power Steering Fluid
Check / top up power assisted steering fluid level.
Fluids
Visually check for any fluid leaks.
Drive Belt
Check drive belt tension wear indicator(s); replace belt(s) if necessary.
Coolant
Check / top up coolant level (assure specific gravity).
Brake Pad
Inspect brake pads for wear (check rotor condition on pad change).
Brake Fluid
Check/top-up brake fluid level. (Renew brake fluid every 2 years.)
Battery
Check / top up battery electrolyte level.
Replace
Wiper Blade
Replace windshield wiper blade rubber inserts.
Oil Filter, Engine
Replace engine oil filter.
Engine Oil
Replace engine oil and sump washer.
Vehicle
Conduct road test; verify parking brake operation
Inspect
Windshield Washer Reservoir
Check / top up windshield washer fluid level.
Tires
Check tire pressure, tread depth and general condition; check for signs of uneven wear; check that tires are correct size and type (check should include spare tire).
Power Steering Fluid
Check / top up power assisted steering fluid level.
Fluids
Visually check for any fluid leaks.
Drive Belt
Check drive belt tension wear indicator(s); replace belt(s) if necessary.
Coolant
Check / top up coolant level (assure specific gravity).
Brake Pad
Inspect brake pads for wear (check rotor condition on pad change).
Brake Fluid
Check/top-up brake fluid level. (Renew brake fluid every 2 years.)
Battery
Check / top up battery electrolyte level.
Replace
Wiper Blade
Replace windshield wiper blade rubber inserts.
Oil Filter, Engine
Replace engine oil filter.
Engine Oil
Replace engine oil and sump washer.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.