Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJAGUAR2000XJR (X308) V8-4.0L SC (AJ27)REPAIR AND DIAGNOSISBODY AND FRAMEDOORS, HOOD AND TRUNKTRUNK / LIFTGATESERVICE AND REPAIRTRUNK SIDE LINER
2000 Jaguar XJR (X308) V8-4.0L SC (AJ27)
Trunk Side Liner
2000 Jaguar XJR (X308) V8-4.0L SC (AJ27)SECTION Trunk Side Liner
TRUNK SIDE LINER
Removal
1. Remove trunk floor carpet.
2. Remove trunk front liner. Trunk Front Liner
3. Remove trunk rear finisher. Trunk Rear Finisher
4. Remove literature pack from trunk side liner (RH side only).
5. Remove side liner from trunk.
Installation
1. Position and fully seat side liner in trunk.
2. Install literature pack on side liner (RH side only).
3. Fit trunk rear finisher. Trunk Rear Finisher
4. Fit trunk front liner. Trunk Front Liner
5. Fit trunk floor carpet.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.