Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJAGUAR1994VANDEN PLAS L6-4.0LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYPISTON, ENGINE
1994 Jaguar Vanden Plas L6-4.0L
Piston, Engine
1994 Jaguar Vanden Plas L6-4.0LSECTION Piston, Engine
Piston Diameter:
Piston -A- 90.964-90.976 mm (3.5812-3.5817 in.)
Piston -B- 90.979-90.991 mm (3.5818-3.5823 in.)
+0.010 in (91.218 mm to 91.245 mm)
+0.020 in (91.472 mm to 91.499 mm)
Wrist Pin Diameter 23.8049-23.8100 mm (0.9372-0.9374 in.)
Piston Ring End Gap
No. 1 Comp. 0.40-0.65 mm (0.0157-0.0255 in.)
No. 2 Comp. 0.40-0.65 mm (0.0157-0.0255 in.)
Oil Ring 0.30-0.55 mm (0.0118-0.0216 in.)
Piston -A- 90.964-90.976 mm (3.5812-3.5817 in.)
Piston -B- 90.979-90.991 mm (3.5818-3.5823 in.)
+0.010 in (91.218 mm to 91.245 mm)
+0.020 in (91.472 mm to 91.499 mm)
Wrist Pin Diameter 23.8049-23.8100 mm (0.9372-0.9374 in.)
Piston Ring End Gap
No. 1 Comp. 0.40-0.65 mm (0.0157-0.0255 in.)
No. 2 Comp. 0.40-0.65 mm (0.0157-0.0255 in.)
Oil Ring 0.30-0.55 mm (0.0118-0.0216 in.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.