Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJAGUAR1994VANDEN PLAS L6-4.0LREPAIR AND DIAGNOSISSPECIFICATIONSELECTRICAL SPECIFICATIONSIGNITION SYSTEMSYSTEM SPECIFICATIONS
1994 Jaguar Vanden Plas L6-4.0L
System Specifications
1994 Jaguar Vanden Plas L6-4.0LSECTION System Specifications
Coil
Primary resistance at 68° F (20° C) .5 ohms ± 10%
Secondary resistance 6k ohms ± 10%
Consumption: stationary 5.0 to 6.5 amps
Consumption: running 2.5 to 3.0 amps
Ignition Rotor
Resistance 1k ohm
Ignition Wires
No.
1 5.6k to 13.2k ohms
2 6.0k to 14.0k ohms
3 6.6k to 15.5k ohms
4 7.7k to 18.2k ohms
5 9.5k to 22.3k ohms
6 9.1k to 21.4k ohms
Coil lead 1.8k to 4.1k ohms
Primary resistance at 68° F (20° C) .5 ohms ± 10%
Secondary resistance 6k ohms ± 10%
Consumption: stationary 5.0 to 6.5 amps
Consumption: running 2.5 to 3.0 amps
Ignition Rotor
Resistance 1k ohm
Ignition Wires
No.
1 5.6k to 13.2k ohms
2 6.0k to 14.0k ohms
3 6.6k to 15.5k ohms
4 7.7k to 18.2k ohms
5 9.5k to 22.3k ohms
6 9.1k to 21.4k ohms
Coil lead 1.8k to 4.1k ohms
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.