Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Air Intake System Description: Notes
The air induction system provides contaminant filtration and is equipped with two resonators to filter unwanted induction noise. As the throttle plate is opened, air is drawn into the air filter housing. The air is pulled through the air filter element which provides maximum air filtration without restricting air flow. From the filter element, the air is drawn into the air cleaner outlet duct and past the first air resonator. This resonator is actually the upper half of the air filter housing. Air flows through the duct, past the Intake Air Temperature (IAT), and into the second air resonator that is mounted directly on top of the engine. Air exiting the second resonator flows directly to the throttle body and into the engine.
| Callout | Component Name |
|---|---|
| 1 | Reset Button |
| 2 | Window |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.