SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 629 (GENERAL INFORMATION)INTRODUCTIONKEY AND LOCK CYLINDER CODINGGLOVE COMPARTMENT DOOR LOCK CYLINDER CODING
2006 Isuzu Ascender S, 5.3 M, 4WD

Glove Compartment Door Lock Cylinder Coding

2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Glove Compartment Door Lock Cylinder Coding
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Glove Compartment Door Lock Cylinder
    GM1193714Courtesy of GENERAL MOTORS CORP.
  1. Select the correct lock tumblers for the desired code by the number stamped on the tumbler.
    2. Fig 2: View Of Lock Tumblers Applying Downward Pressure Onto Locked Position
    GM1193722Courtesy of GENERAL MOTORS CORP.
  2. Install lock tumblers (2), by applying downward pressure until locked into position.
    3. IMPORTANT: When key is inserted into correct coded lock cylinder, all tumblers except the retainer is flush with the lock cylinder.
  3. Check coding of lock cylinder (4). Insert key.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.