Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 565 (DISC BRAKE SYSTEM)SPECIFICATIONSDISC BRAKE COMPONENT SPECIFICATIONS
2006 Isuzu Ascender S, 5.3 M, 4WD
Disc Brake Component Specifications
2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Disc Brake Component Specifications
WARNING: This page is about a different car, the 2009 GMC Envoy and 2009 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
General Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Brakes | ||
|
27.5 mm | 1.08 in |
|
29.0 mm | 1.14 in |
|
0.051 mm | 0.002 in |
|
1.50 mm | 0.059 in |
|
0.025 mm | 0.001 in |
| Rear Brakes | ||
|
18.50 mm | 0.728 in |
|
20.0 mm | 0.787 in |
|
0.051 mm | 0.002 in |
|
1.50 mm | 0.059 in |
|
0.025 mm | 0.001 in |
| * All brake rotors have a minimum thickness dimension cast into them. Replace any rotor that is worn or machined below this specification. | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.