SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 464 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT VIEWS & COMPONENT CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSINFRARED TRANSMITTER MODULE (UUC)
2006 Isuzu Ascender S, 5.3 M, 4WD

Infrared Transmitter Module (UUC)

2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Infrared Transmitter Module (UUC)
WARNING: This page is about a different car, the 2008 Suzuki XL7, 2008 Pontiac Torrent, and 2008 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Infrared Transmitter Module (UUC) Connector End View
GM1454407Courtesy of GENERAL MOTORS CORP.
Infrared Transmitter Module (UUC)

Pin Wire Circuit Function
1 0.5 L-BU 5826 Left DVD Audio Signal (+)
2 0.5 PU 6979 DVD Audio Common
3 0.5 WH 5828 Right DVD Audio Signal (+)
4 0.35 YE 343 Accessory Voltage
5-7 - - Not Used
8 0.5 OG/BK 5831 Remote Infra Red Signal (+)
9-11 - - Not Used
12 0.5 BK/WH 1551 Ground
13-15 - - Not Used
16 0.5 TN/WH 5830 Remote Infra Red Signal (-)
Connector Part Information 
  • OEM: 15429806
  • Service: See Catalog
  • Description: 16-Way F Micro 64 Series (BN)

Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.