SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 464 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT VIEWS & COMPONENT CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSBODY CONTROL MODULE (BCM) X7
2006 Isuzu Ascender S, 5.3 M, 4WD

Body Control Module (BCM) X7

2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Body Control Module (BCM) X7
WARNING: This page is about a different car, the 2008 Suzuki XL7, 2008 Pontiac Torrent, and 2008 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module (BCM) X7 Connector End View
GM1664505Courtesy of GENERAL MOTORS CORP.
Body Control Module (BCM) X7

Pin Wire Circuit Function
1-5 - - Not Used
6 0.35 YE 356 Driver Door Lock Relay Unlock Control
7 0.35 L-GN 1391 Driver Door Unlock Relay Control
8 - - Not Used
9 0.35 L-BU 5921 Driver Door Unlock Relay Control
10 - - Not Used
11 0.35 OG/BK 781 Driver Door Lock Switch Unlock Signal
12 0.35 PK/BK 780 Driver Door Lock Switch Lock Signal
13 0.35 D-GN 5706 Liftgate Latch Relay Supply Voltage
14-24 - - Not Used
25 0.35 PU/WH 6816 Indicator Dimming Control
26-28 - - Not Used
Connector Part Information 
  • OEM: HITPB-28-G-H
  • Service: 88988806
  • Description: 28-Way F Receptacle 0.64 (GY)
Terminal Part Information 
  • Terminal/Tray: SNAC3-A021T-M0.64/20
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: 12094429/J-35616-64B (L-BU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.