SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 457 (FRONT SUSPENSION SYSTEM)REPAIR INSTRUCTIONSSTRUT ASSEMBLY REPLACEMENTINSTALLATION PROCEDURE
2006 Isuzu Ascender S, 5.3 M, 4WD

Installation Procedure

2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Installation Procedure
WARNING: This page is about a different car, the 2008 Pontiac Torrent and 2008 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Strut Assembly To Body Bolts
    GM1467198Courtesy of GENERAL MOTORS CORP.
  1. Position the strut assembly to the vehicle.
    2. NOTE: Refer to Fastener Notice .
  2. Install the 3 upper strut mount bolts.

    Tighten:  Tighten the upper strut mount bolts to 25 N.m (18 lb ft).

    3. Fig 2: Identifying Steering Knuckle To Strut Bolts & Nuts
    GM1826249Courtesy of GENERAL MOTORS CORP.
  3. Install the lower strut bolts and nuts.

    Tighten:  Tighten the bolts and nuts to 200 N.m (148 lb ft).

    4. Fig 3: Identifying Stabilizer Link Retaining Nut
    GM1826177Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.