SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 441 (LIGHTING SYSTEMS)REPAIR INSTRUCTIONSCARGO LAMP REPLACEMENT
2006 Isuzu Ascender S, 5.3 M, 4WD

Cargo Lamp Replacement

2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Cargo Lamp Replacement
WARNING: This page is about a different car, the 2008 Pontiac Torrent and 2008 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Cargo Lamp
GM1714081Courtesy of GENERAL MOTORS CORP.
Callout Component Name
NOTE: Refer to Fastener Notice .
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .
1 Cargo Lamp Lens
Tip:  Use a small flat bladed tool to aid in the removal of the lens.
2 Cargo Lamp Assembly
Tip: 
  1. Using a small flat-bladed tool, disengage the cargo lamp attaching clips by gently prying at each side of the retaining tab while pulling the tab off of the headliner.
  2. Pull the forward edge of the cargo lamp downward and rearward to disengage the lamp from the headliner.
  3. Disconnect the electrical connector.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.