Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 332 (FRONT DRIVE AXLE)REPAIR INSTRUCTIONSDIFFERENTIAL CARRIER ASSEMBLY DISASSEMBLENOTES
2006 Isuzu Ascender S, 5.3 M, 4WD
Differential Carrier Assembly Disassemble: Notes
2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Notes
WARNING: This page is about a different car, the 2008 Saab 9-7X. However, it is still accessible from the selected car via links, so may be relevant.
Tools Required
- J 22912-B Split-Plate Bearing Puller. See Special Tools .
- J 2619-01 Slide Hammer with Adapter
- J 29369-1 Bushing and Bearing Remover. See Special Tools .
- J 29369-2 Bushing and Bearing Remover (2"-3"). See Special Tools .
- J 42213 Adjuster Sleeve Socket. See Special Tools .
- J 45224 Side Bearing Adjustment Wrench. See Special Tools .
- J 45228 Pinion Bearing Cup Remover/Installer. See Special Tools .
- J 45234 Pinion Remover. See Special Tools .
- J 8614-01 Flange and Pulley Holding Tool. See Special Tools .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.