Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 302 (ANTILOCK BRAKE SYSTEM WITH TCS & VSES)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Isuzu Ascender S, 5.3 M, 4WD
Fastener Tightening Specifications
2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2008 Saab 9-7X. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| EBCM to BPMV | 5 N.m | 39 lb in |
| EHCU to Bracket | 9 N.m | 7 lb in |
| EHCU Bracket Mounting Bolts | 25 N.m | 18 lb ft |
| Front Brake Lines to BPMV | 25 N.m | 18 lb ft |
| Front Wheel Speed Sensor Mounting Bolt | 18 N.m | 13 lb ft |
| Master Cylinder Brake Lines to BPMV | 25 N.m | 18 lb ft |
| Rear Brake Line to BPMV | 25 N.m | 18 lb ft |
| Steering Knuckle to Front Hub/Bearing Mounting Bolts | 180 N.m | 133 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.