Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 3 (ADJUSTABLE PEDAL SYSTEM)COMPONENT LOCATORADJUSTABLE PEDALS COMPONENT VIEWS
2006 Isuzu Ascender S, 5.3 M, 4WD
Adjustable Pedals Component Views
2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Adjustable Pedals Component Views
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Electronic Adjustable Pedals (EAP) Relay |
| 2 | C225 |
| 3 | Electronic Adjustable Pedals (EAP) Assembly Connector |
| 4 | Accelerator Pedal Position (APP) Sensor |
| Callout | Component Name |
|---|---|
| 1 | Hazard Switch |
| 2 | Inflatable Restraint Steering Wheel Module Coil Connector C4 |
| 3 | Inflatable Restraint Steering Wheel Module Coil Connector C2 |
| 4 | Inflatable Restraint Steering Wheel Module Coil Connector C3 |
| 5 | Electronic Adjustable Pedals (EAP) Switch |
| 6 | Turn Signal/Multifunction Switch |
| 7 | C201 |
| 8 | Inflatable Restraint Steering Wheel Module Coil Connector C1 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.