Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Data Link Connector (DLC)
2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Data Link Connector (DLC)
WARNING: This page is about a different car, the 2008 Saab 9-7X. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
|
Terminal Part Information
|
| Pin | Wire | Circuit | Function |
|---|---|---|---|
| 1 | - | - | Not Used |
| 2 | 0.35 PU | 1132 | Class 2 Serial Data |
| 3 | - | - | Not Used |
| 4 | 0.35 BK | 2250 | Ground |
| 5 | 0.35 BK/WH | 751 | Ground |
| 6 | 0.35 D-BU | 6105 | High Speed GMLAN Serial Data (+) |
| 7-13 | - | - | Not Used |
| 14 | 0.35 L-BU/BK | 6106 | High Speed GMLAN Serial Data (-) |
| 15 | - | - | Not Used |
| 16 | 0.35 OG | 640 | Battery Positive Voltage |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.