SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 272 (CELLULAR, ENTERTAINMENT, AND NAVIGATION)REPAIR INSTRUCTIONSVIDEO PLAYER BRACKET REPLACEMENTREMOVAL PROCEDURE
2006 Isuzu Ascender S, 5.3 M, 4WD

Removal Procedure

2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Removal Procedure
WARNING: This page is about a different car, the 2008 Saab 9-7X. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the video display assembly. Refer to Video Display Replacement .
    2. Fig 1: Identifying Rear Overhead Console Carrier Screws
    GM792148Courtesy of GENERAL MOTORS CORP.
  2. Remove the two rear overhead console carrier screws (1).
    3. Fig 2: View Of Front Bracket Retaining Bolts
    GM778730Courtesy of GENERAL MOTORS CORP.
  3. Remove the front bracket retaining bolts.
    4. Fig 3: Exposing Rear Bracket Retaining Bolt
    GM792151Courtesy of GENERAL MOTORS CORP.
  4. Carefully pull down on the rearward edge of the headliner in order to expose the rear bracket retaining bolt.
  5. Remove the rear retaining bolt.
  6. Carefully remove the bracket from the vehicle through the headliner opening.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.