Theft Deterrent Control Module (BAE)

2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Theft Deterrent Control Module (BAE)
WARNING: This page is about a different car, the 2007 Isuzu Ascender, 2007 GMC Envoy, 2007 Chevrolet TrailBlazer, and 2007 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Theft Deterrent Control Module (BAE) Connector End View
GM805442Courtesy of GENERAL MOTORS CORP.
Theft Deterrent Control Module (BAE) Connector Parts Information

Connector Part Information 
  • OEM: 50-57-9705
  • Service: Service by Harness - See Part Catalog
  • Description: 5-Way F Molex 70066 Series (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
Theft Deterrent Control Module (BAE) Connector Terminal Identification

Pin Wire Color Circuit No. Function
A OG 1140 Battery Positive Voltage
B PK 1020 Ignition 0 Voltage
C BK/WH 751 Ground
D WH 710 Class 2 Serial Data
E WH 1132 Class 2 Serial Data
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.