Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor

2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor
WARNING: This page is about a different car, the 2007 Isuzu Ascender, 2007 GMC Envoy, 2007 Chevrolet TrailBlazer, and 2007 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Connector End View
GM647974Courtesy of GENERAL MOTORS CORP.
Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Connector Parts Information

Connector Part Information 
  • OEM: 15326822
  • Service: 88987186
  • Description: 5-Way F GT 150 Series Sealed (BK)
Terminal Part Information 
  • Terminal/Tray: 12191819/8
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 15315247/J-35616-2A (GY)
Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Connector Terminal Identification

Pin Wire Color Circuit No. Function
A YE 492 MAF Sensor Signal
B BK 450 Ground
C PK 839 Ignition 1 Voltage
D BK 2760 Low Reference
E TN 472 IAT Sensor Signal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.