Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 199 (BATTERY, CHARGING SYSTEM AND STARTING SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Isuzu Ascender S, 5.3 M, 4WD
Fastener Tightening Specifications
2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2007 Isuzu Ascender, 2007 GMC Envoy, 2007 Chevrolet TrailBlazer, and 2007 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Air Conditioning Line Bracket Bolt (4.2L) | 10 N.m | 89 lb in |
| Battery Cable Channel Bolt (5.3L) | 12 N.m | 106 lb in |
| Battery Hold Down Retainer Nut | 15 N.m | 11 lb ft |
| Battery Negative Cable | 15 N.m | 11 lb ft |
| Battery Positive Cable | 15 N.m | 11 lb ft |
| Battery Positive Cable Lead to Starter Nut | 9 N.m | 80 lb in |
| Battery Tray Bolt | 20 N.m | 15 lb ft |
| Battery Tray Brace Bolt | 10 N.m | 89 lb in |
| Engine Harness to Engine Block Bolt (4.2L) | 50 N.m | 37 lb ft |
| Engine Harness to Shock Tower Bolt (4.2L) | 10 N.m | 89 lb in |
| Engine Harness to Wheelhouse Panel Bolt (4.2L) | 10 N.m | 89 lb in |
| Engine Lift Hook Bolt (4.2L) | 50 N.m | 37 lb ft |
| Generator Bolt | 50 N.m | 37 lb ft |
| Generator Bracket Bolt (5.3L) | 50 N.m | 37 lb ft |
| Generator Cable Nut | 9 N.m | 80 lb in |
| Ground Cable to Shock Tower Bolt (5.3L) | 10 N.m | 89 lb in |
| Ground Terminal to Engine Block Bolt (5.3L) | 50 N.m | 37 lb ft |
| Ground Terminal to Front Fender Bolt (5.3L) | 10 N.m | 89 lb in |
| Positive Terminal to Underhood Junction Block Bolt | 10 N.m | 89 lb in |
| Starter Bolt | 50 N.m | 37 lb ft |
| Starter Solenoid Nut | 3.4 N.m | 30 lb in |
| Transmission Cover Bolt (5.3L) | 9 N.m | 80 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.