SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 196 (DATA COMMUNICATION SYSTEM)COMPONENT LOCATORDATA COMMUNICATION CONNECTORSDATA LINK CONNECTOR (DLC)
2006 Isuzu Ascender S, 5.3 M, 4WD

Data Link Connector (DLC)

2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Data Link Connector (DLC)
WARNING: This page is about a different car, the 2007 Isuzu Ascender, 2007 GMC Envoy, 2007 Chevrolet TrailBlazer, and 2007 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Data Link Connector (DLC) Connector End View
GM68793Courtesy of GENERAL MOTORS CORP.
Data Link Connector (DLC) Connector Parts Information

Connector Part Information 
  • OEM: 12110250
  • Service: 12110250
  • Description: 16-Way F Metri-Pack 150 Series (BK)
Terminal Part Information 
  • Pins: 2, 5-, 14
  • Terminal/Tray: 12129484/19
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 12094429/J-35616-2A (GY)
  • Pins: 4, 16
  • Terminal/Tray: 12129484/19
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 12094429/J-35616-2A (GY)
Data Link Connector (DLC) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 - - Not Used
2 PU 1132 DLC Class 2 Serial Data
3 - - Not Used
4 BK 2250 Ground
5 BK/WH 751 Ground
6 D-BU 6105 High Speed GMLAN Serial Data (+)
7-13 - - Not Used
14 L-BU/BK 6106 High Speed GMLAN Serial Data (-)
15 - - Not Used
16 OG 640 Battery Positive Voltage
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.