SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 173 (CELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEM)COMPONENT LOCATORENTERTAINMENT/COMMUNICATION CONNECTORSVEHICLE COMMUNICATION INTERFACE MODULE (VCIM) C1 (UE1)
2006 Isuzu Ascender S, 5.3 M, 4WD

Vehicle Communication Interface Module (VCIM) C1 (UE1)

2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Vehicle Communication Interface Module (VCIM) C1 (UE1)
WARNING: This page is about a different car, the 2007 Isuzu Ascender, 2007 GMC Envoy, 2007 Chevrolet TrailBlazer, and 2007 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Vehicle Communication Interface Module (VCIM) C1 (UE1) Connector End View
GM1471689Courtesy of GENERAL MOTORS CORP.
Vehicle Communication Interface Module (VCIM) C1 (UE1) Connector Parts Information

Connector Part Information 
  • OEM: 15431362
  • Service: 15306351
  • Description: 16-Way F Micro 100A Series (NA)
Terminal Part Information 
  • Pins: 2-3, 6-8, 11, 15-16
  • Terminal/Tray: 15445905/23
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: 12180559/J-35616-6 (BN)
Vehicle Communication Interface Module (VCIM) C1 (UE1) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 - - Not Used
2 BN/WH 2517 Keypad Red LED Signal
3 YE/BK 2516 Keypad Green LED Signal
4-5 - - Not Used
6 L-GN/BK 2515 Keypad Supply Voltage
7 BK 1450 Ground
8 BK 1450 Ground
9-10 - - Not Used
11 D-GN/WH 2514 Keypad Signal
12-14 - - Not Used
15 OG 3140 Battery Positive Voltage
16 OG 3140 Battery Positive Voltage
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.