SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 153 (SHIFT INTERLOCK SYSTEM)COMPONENT LOCATORSHIFT LOCK CONTROL CONNECTORSTRANSMISSION CONTROL MODULE
2006 Isuzu Ascender S, 5.3 M, 4WD

Transmission Control Module

2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Transmission Control Module
WARNING: This page is about a different car, the 2007 Pontiac Torrent and 2007 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Transmission Control Module Connector End View
GM309512Courtesy of GENERAL MOTORS CORP.
Transmission Control Module Connector Parts Information

Connector Part Information 
  • OEM: 7183-7192-30
  • Service: See Catalog
  • Description: -
Terminal Part Information 
  • Pins: 5, 6, 7, 8, 11, 12, 14
  • Terminal/Tray: 7116-4720-02/14
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: 15315247/J-35616-64B (L-BU)
  • Pins: 1, 9
  • Terminal/Tray: 7116-4103-08/9
  • Core/Insulation Crimp: E/1
  • Release Tool/Test Probe: 12094430/J-35616-2A (GY)
Transmission Control Module Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 RD/WH 540 Battery Positive Voltage
5 OG/BK 1786 Park/Neutral Signal Ignition Lock Cylinder Control Actuator Signal (2003 and later)
6 TN/BK 2500 High Speed GMLAN Serial Data Bus+
7 TN 2501 High Speed GMLAN Serial Data Bus-
8 TN/BK 2500 High Speed GMLAN Serial Data Bus+
9 BK/WH 451 Ground
11 PK 1339 Ignition 1 Voltage
12 BN 4 Accessory Voltage
14 TN 2501 High Speed GMLAN Serial Data Bus-
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.