Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 119 (GENERAL INFORMATION)INTRODUCTIONKEY AND LOCK CYLINDER CODINGDETERMINING KEY CODE WITH EXACTA CUTTER
2006 Isuzu Ascender S, 5.3 M, 4WD
Determining Key Code with Exacta Cutter
2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Determining Key Code with Exacta Cutter
WARNING: This page is about a different car, the 2007 Pontiac Torrent and 2007 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Insert the key in the approved key cutting tool with the tip of the key against the stop.
- With the cutting die in the down position, move the carriage toward the die until it bottoms out. Record the depth 1, 2, 3 or 4.
- Repeat for each position.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.