SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 111 (DATA COMMUNICATION SYSTEM)COMPONENT LOCATORDATA COMMUNICATION CONNECTORSBODY CONTROL MODULE - C7
2006 Isuzu Ascender S, 5.3 M, 4WD

Body Control Module - C7

2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Body Control Module - C7
WARNING: This page is about a different car, the 2007 Pontiac Torrent and 2007 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module - C7 Connector End View
GM1664505Courtesy of GENERAL MOTORS CORP.
Body Control Module - C7 Connector Parts Information

Connector Part Information 
  • OEM: HITPB-28-G-H
  • Service: 88988806
  • Description: 28-Way F Receptacle 0.64 (GY)
Terminal Part Information 
  • Terminal/Tray: SNAC3-A021T-M0.64/20
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: 12094429/J-35616-64B (L-BU)
Body Control Module - C7 Connector Terminal Identification

Pin Wire Color Circuit No. Function
1-5 - - Not Used
6 YE 356 Driver Door Lock Relay Unlock Control
7 L-GN 1391 Driver Door Unlock Relay Control
8 - - Not Used
9 L-BU 5921 Driver Door Unlock Relay Control
10 - - Not Used
11 OG/BK 781 Driver Door Lock Switch Unlock Signal
12 PK/BK 780 Driver Door Lock Switch Lock Signal
13 D-GN 5706 Endgate Latch Relay Supply Voltage
14-24 - - Not Used
25 PU/WH 6816 Indicator Dimming Control
26-28 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.